Arduino PCR1000 project available

I have decided to make the source code of my “Arduino- PRC1000” project available in its present form, as a ‘work in progress’.

It’s the same code that is use in the ‘youtube’ video so it should be working for you.

Beware that the program is available ‘As is’ with no guarantee at all.  No support is available.

If you choose to use this program to send commands to your PRC1000, you do so at your own risk.

There has been some discussion on the PCR1000 mailing list that you may be able to damage the PCR1000 by sending the wrong software commands to it.

Have fun …

Project files: https://github.com/puyansude/pcr1000v6/blob/master/PCR1000Ver6.rar
Project page: https://ve2cuy.wordpress.com/arduino/

Advertisements

8 Responses to Arduino PCR1000 project available

  1. Bonjour.

    J’ai regarder ton site et je suis très interesser par la solution du PCR-1000.

    Par malheur le code source est manquant.

    Serait’il possible que ule lien soit briser?

    J’aimerai avoir le code sousce pour faire cette expérience avec le PCR-1000.

    Merci Bien et 73’s

    Laurent VE2XVI

  2. Tim says:

    I am having problems accessing your files for the PCR-1000 Arduino sketch.
    Could you possibly elail them to me?

    73
    Tim
    N4ENG

  3. Gilles says:

    Bonjour, je ne suis pas très doué en soft, mais je n’arrive pas à compiler (erreurs) aussi bien avec une version récente que ancienne d’Arduino.
    une récente version serait super, merci d’avance, 73
    f5gpo @ free. fr

    • ve2cuy says:

      Bonjour Gilles,

      Avez-vous copié ma classe ‘PCR1000’ dans le dossier des librairies d’Arduino?

      Voici un exemple des messages d’erreurs affichés dans le cas ou cette librairie serait manquante:

      —-

      PCR1000Ver6:91: error: ‘FREQUENCY_MODE_CW’ was not declared in this scope
      PCR1000Ver6:91: error: ‘FREQUENCY_MODE_LSB’ was not declared in this scope
      PCR1000Ver6:91: error: ‘FREQUENCY_MODE_USB’ was not declared in this scope
      PCR1000Ver6:91: error: ‘FREQUENCY_MODE_AM’ was not declared in this scope
      PCR1000Ver6:91: error: ‘FREQUENCY_MODE_NFM’ was not declared in this scope
      PCR1000Ver6:91: error: ‘FREQUENCY_MODE_WFM’ was not declared in this scope
      PCR1000Ver6:95: error: ‘PCR1000Class’ does not name a type
      PCR1000Ver6:107: error: ‘FREQUENCY_LENGTH’ was not declared in this scope
      PCR1000Ver6.pde: In function ‘void resetPCR1000()’:
      PCR1000Ver6:219: error: ‘PCR’ was not declared in this scope
      PCR1000Ver6.pde: In function ‘void displaySquelchState(boolean)’:
      PCR1000Ver6:281: error: ‘BYTE’ was not declared in this scope

      Depuis Arduino 1.0, le mot-clé « BYTE » n’est plus supporté.
      Veuillez utiliser Serial.write() à la place.

      PCR1000Ver6.pde: In function ‘void updateSignalDisplay()’:
      PCR1000Ver6:356: error: ‘PCR’ was not declared in this scope
      PCR1000Ver6:357: error: ‘PCR_SQUELCH_OPEN’ was not declared in this scope
      PCR1000Ver6.pde: In function ‘void directScan()’:
      PCR1000Ver6:406: error: ‘PCR’ was not declared in this scope
      PCR1000Ver6:406: error: ‘FREQUENCY_MODE_NFM’ was not declared in this scope
      PCR1000Ver6:406: error: ‘FREQUENCY_FILTER_6K’ was not declared in this scope
      PCR1000Ver6:417: error: ‘PCR_SQUELCH_OPEN’ was not declared in this scope
      PCR1000Ver6.pde: In function ‘void tuneRadio()’:
      PCR1000Ver6:515: error: ‘PCR’ was not declared in this scope
      PCR1000Ver6:515: error: ‘FREQUENCY_FILTER_6K’ was not declared in this scope
      PCR1000Ver6.pde: In function ‘void memoryScan()’:
      PCR1000Ver6:559: error: ‘PCR’ was not declared in this scope
      PCR1000Ver6:559: error: ‘PCR_SQUELCH_OPEN’ was not declared in this scope

      —-

      73

      Alain

      • Laurent Giasson says:

        Bonjour Alain.

        Je crois que tu a envoyer ton courriel a la mauvaise adresse.

        73’s

        Laurent VE2XVI

      • ve2cuy says:

        Désolé Laurent,

        je fais la correction.

        73
        Alain
        VE2CUY

        Envoyé de mon iPad

        >

      • Gilles PORCHER says:

        après avoir mis le montage en attente, et sur les conseils d’un autre OM, j’ai utilisé une ancienne version d’Arduino (0022) et cela semble fonctionner, reste des améliorations à peaufiner
        Encore merci pour votre réponse
        Cordialement
        Gilles F5GPO

  4. Coşkun Muti says:

    Hi,
    I am receiving error message while compiling. Could you please send me (coskunmuti@gmail.com) compiled hex file for ATMEGA328P and source code& library files.
    Thanks for helps.

    Coskun MUTI

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: